Fuel Cell Department Staff
Click on a name below for a full resume.
Romesh Kumar, Manager, Fuel Cell Technology
phone: 630/252-4342, fax: 630/252-4176, e-mail:
kumar@cmt.anl.gov
- PhD, Chemical Engineering, University of California-Berkeley
- Fuel cell system design and analysis, fuel processing for fuel cell
systems, development of catalytic and sorbent materials
- Ten patents
Shabbir Ahmed, Group Leader, Fuel Processor Engineering
phone: 630/252-4553, fax: 630/972-4553, e-mail:
ahmed@cmt.anl.gov
- PhD, Chemical Engineering, University of Nebraska
- Modeling, catalyst development, reactor design, and systems analysis for
fuel processing in fuel cell systems
- Nine patents
Deborah J. Myers, Group Leader, Hydrogen and Fuel Cell Materials
phone: 630/252-4261, fax: 630/252-4176, e-mail:
myers@cmt.anl.gov
- PhD, Analytical Chemistry, University of Illinois-Urbana
- Metallic bipolar-plate-supported solid oxide fuel cell (SOFC)
- High-temperature, low-relative-humidity polymer electrolytes
- Thermochemical and electrolysis hydrogen production
Daniel V. Applegate
phone: 630-252-4367, fax: 630/252-4410, e-mail:
applegate@cmt.anl.gov
- BA, Biology, Trinity Christian College
- Long-term testing of fuel-reforming catalysts
- Analytical support for fuel-reforming tests
- Diesel reformer development for fuel cells
J. David Carter, Materials Engineer
phone: 630/252-4544, fax: 630/252-4176, e-mail:
carter@cmt.anl.gov
- PhD, Ceramic Engineering, University of Missouri-Rolla
- Materials, processing, and cell and stack testing for SOFCs
- Eight patents , four pending
Terry A. Cruse, Metallurgical Engineer
phone: 630/252-6043, fax: 630/252-4176, e-mail:
cruse@cmt.anl.gov
- PhD, Metallurgical Engineering, University of Missouri-Rolla
- Materials and processing techniques for SOFC applications
- Novel materials and processing techniques for high-temperature ceramic
composites
Magali Ferrandon, Chemical Engineer
phone: 630/252-6260, fax: 630/252-4176, e-mail:
ferrandon@cmt.anl.gov
- PhD, Chemical Engineering, Royal Institute of Technology, Stockholm,
Sweden
- Development and testing of catalyst materials for fuel reforming for
fuel cell systems
- Characterization of catalyst materials, including chemisorption and
EXAFS
John Kopasz, Chemist
phone: 630/252-7531, fax: 630/972-4405, e-mail:
kopasz@cmt.anl.gov
- PhD, Inorganic Chemistry, State University of New York-Buffalo
- Fuel processing for fuel cells
- Catalyst development and evaluation
Sheldon H.D. Lee, Chemical Engineer
phone: 630/252-4395, fax: 630/972-4442, e-mail:
lee@cmt.anl.gov
- PhD, Fuels Engineering, University of Utah
- Removal of CO from fuel gas for fuel cells used in transportation
- Development of reforming technology for hydrocarbon fuels used in fuel
cells
Di-Jia Liu, Chemist, Physical Chemist
phone 630/252-4511, fax 630/252-4176, e-mail:
liud@cmt.anl.gov
- PhD, Physical Chemistry, The University of Chicago
- Fuel reforming and electrode material development for solid oxide fuel
cells
- Nanomaterial development for hydrogen storage and proton exchange
membrane fuel cells
Jennifer Mawdsley, Materials Engineer
phone: 630/252-4608, fax: 630/972-4452, e-mail:
mawdsley@cmt.anl.gov
- PhD, Materials Science and Engineering, Northwestern University
- Fuel processing for fuel cell systems
- Catalyst development and evaluation
- Fuel cell materials development and evaluation
Suhas G. Niyogi, Polymer Chemist
phone: 630/252-4510, fax: 630/972-4502, e-mail:
niyogi@cmt.anl.gov
- PhD, Polymer Chemistry, Calcutta University
- Polymerization and new polymers for membranes
- Reactions of polymers, polymer blends and alloys, filled polymers and
polymer nanocomposites
- Seven patents and thirty-three research publications
Dionissios (Dennis) Papadias, Chemical Engineer
phone: 630/252-3206, fax: 630/972-4523, e-mail:
papadias@cmt.anl.gov
- PhD, Chemical Engineering, Royal Institute of Technology, Stockholm
Sweden
- Author of 7 scientific publications in international journals in the
field of chemical engineering
- Diverse oral presentations at national and international conferences
Xiaoping Wang, Chemist
phone: 630/252-1182, fax: 630/252-4176, e-mail:
wangx@cmt.anl.gov
- PhD, Electrochemistry, North Carolina State University
- Non-platinum electrocatalysts for polymer electrolyte fuel cells
- Polymer electrolyte fuel cell electrode stability
- Cathode and sulfur-tolerant anode materials for solid oxide fuel cells
- Sorbents for sulfur removal from reformates
|
